AUTOMOTIVE TESTER
Model No：DM-9030
| Description： |
| AUTOMOTIVE TESTER Model : DM-9030 * DCV, ACV, ohms, Hz, Temp., Diode, DCA, ACA, RPM, DWELL, Beeper. * 10 Mega ohm impedance, 18 mm LCD. * Size : 185 x 87 x 39 mm. |
DCA/ACA CURRENT ADAPTER
Model No：CA-203
| Description： |
| DCA/ACA CURRENT ADAPTER Model : CA-203 * Range : DCA, ACA, 200 A, 2000 A * DCA Output : 1 DCmV/1 DCA. * ACA Output : 1 ACmV/1 ACA. * Size : 210 x 64 x 33 mm |
DCA/ACA CURRENT ADAPTER
Model No：CA-502
| Description： |
| Model : CA-502(200 A,1000 A) * DCA Output : 1 DCmV/1 DCA. * ACA Output : 1 ACmV/1 ACA. * CA-502 : 185 x 78 x 30 mm |
GASOLINE TACHOMETER
Model No：DT-2237A
| Description： |
| Model : DT-2237 GASOLINE TACHOMETER * Non-contact engine RPM measuring. * Available the automobile engine, motorcycle engine, generator engine. * 10 to 50,000 RPM, 0.05% accuracy. * Memory(Max., Min., Last value). |
VACUUM METER
Model No：VC-9200
| Description： |
| VACUUM METER Model : VC-9200 * 1125 torr x 1 torr, 1500 mbar x 1 mbar. * Units : torr, mm Hg, micron, KPa, Pa, inch Hg, psi. * RS232, Hold, Record(Max., Min.). * Heavy duty vacuum sensor used for air, oil gas… * Application : Automobile, Industrial, laboratory, heating, ventilation, medical hospital.. |
ALLIGATOR CLIPS
Model No：AL-03S
RPM INDUCTIVE PICK UP SENSOR
Model No：IP-07
| Description： |
| INDUCTIVE PICK UP SENSOR Model : IP-07 * DM-9030 optional inductive pick up sensor is used to measure the RPM, only need to clip the high tension wire of no. 1 plug. |
RPM INDUCTIVE PICK UP SENSOR
Model No：IP-09
| Description： |
| INDUCTIVE PICK UP SENSOR Model : IP-09 * Heavy duty type. * DM-9030 optional inductive pick up sensor is used to measure the RPM, only need to clip the high tension wire of no. 1 plug. |
50A/50mA SHUNT
Model No：ST-50
| Description： |
| 50A/50mV SHUNT Model : ST-50 * Resistance shunt match DMM DC 200 mV range to measure current up to DC/AC 50A precisely. * Output – 1 ACmV/1 ACA, 1 DCmV/1 DCA. * Size : 135 x 30 x 30 mm. |
200 AMP CURRENT SHUNT
Model No：LS-04
| Description： |
| 200 AMP CURRENT SHUNT Model : LS-04 Optional current shunt for DM-9030. |