Karl Fischer Moisture Titrator (Coulometric titration) [MKC-710B]

Karl Fischer Moisture













Karl Fischer Moisture High-performance titrator at a lower price Reduction of power consumption by 30% compared with the conventional product

PDF Image


  • By reviewing the conventional electrolytic control method , reduction of power consumption by 30%
  • Field measurements without access to power sources are possible by connecting a commercially available battery
  • By connecting an Android device , a titration curve can be displayed in real-time
  • Measurement results are converted to PDF and can be stored in a USB flash drive



Type Karl Fischer Moisture Titrator
Model MKC-710B
Product configuration MKC-710+IDP-100+Manual Solvent Change Unit
Measuring method Karl Fischer Coulometric titration
Measuring range Water content / Bromine index : 10ug to 300mg (depends on reagent)
Measurement cell 2-Component or 1-Component
Precision Relative standard deviation : less than 0.3% (n=10)
*Per KEM standard measurement conditions and standard liquids
Display resolution 0.1ug
Control method Constant current pulse time contro
Endpoint detection Alternate current polarization method with a twin platinum electrode
EP sense method Selective drift stability or limit measurement time
Required solvent 2-Component cell : Anolyte 100mL , Catholyte 5mL
1-Component cell : Anolyte 150mL
Method 20
Key operation Sheet key
Displays 1) Black and white LED-backlit LCD
2) English / Japanese / Mandarin Chinese / Korean / Russian / Spanish
3) 1-channel display
Calculation Concentration of water content , statistics data processing (mean , SD and RSD) and automatic averaging of blank value and factor value
Data storage 100 samples
GLP conformance Registration of operator /Record of check results / Record of factor measurement / Management of conduction time
External I/O RS-232C port x2 :
for Dot matrix printer , Electronic balance , Data Capture Software (SOFT-CAP)
USB×1 :
for USB flash drive , Thermal printer , Keyboard , Barcode reader , Foot switch , USB HUB , Android device
Ambient condition
1) Temperature 5 to 35°C
2) Humidity 85%RH or below (no condensation)
Power source AC100 to 240V +/- 10% 50/60 Hz
Power consumption
Main unit Approx. 20W
Printer Approx. 7W
Titration unit 141(W) x 292(D) x 244(H) mm
Stirrer 107(W) x 206(D) x 340(H) mm (not incl. Solvent Change unit)
Solvent Change Unit 240(W) x 140(D) x 405(H) mm (not incl. tubing)
Printer 106(W) x 180(D) x 88(H) mm
Titration unit Approx.3.0kg
Stirrer Approx.2.0kg
Solvent Change Unit Aprox.0.6kg
Printer Aprox.0.4kg
Conformity standard CE marking EMC : EN61326-1 LVD : EN61010-1