LCR METER Model No：LCR-9184
SMD TESTER, optional Model：SMDA-22
SMD TEST CLIP, optionalModel：SMDC-21
| Description： |
| * Intelligent microprocessor circuit, professional. * 19999/1999 counts dual LCD display * Auto LCR smart check and measurement. * Test range : (ex : F = 1 KHz) L : 200.00 uH to 2000.0 H C : 2000.0 pF to 2.000 mF R : 20.000 to 200.0 M * Series/Parallel modes are selectable. * DCR mode 200.00 to 200.0M * Five test frequency are available : 100 Hz/120 Hz/1 KHz/10 KHz/100 KHz * Ls/Lp/Cs/Cp with D / Q / / ESR Parameter. * LCD Display with backlight structure. * Power : DC 9V battery or DC 9V adapter in. * RS232/USB computer interface. * Optional SMD test clips, SMDC-21. * Optional SMD tester, SMDA-22. * Optional USB cable, USB-01. * Optional data acquisition software, SW-E803. * Optional holster, HS-03. |
LCR METER Model No：Model :LCR-9183
100 Hz╱120 Hz╱1 KHz╱10 KHz╱100 KHz, Professional
SMD TESTER, optional Model：SMDA-22
HOLSTER Model：HS-03
SMD TEST CLIP, optionalModel：SMDC-21
FEATURES
* 19,999/1,999 counts dual LCD display. Resistance ( Rp/Rs )
* AutoLCR smart check and measurement.
* Serial/Parallel modes are selectable. Range Accuracy Accuracy Remark
* Ls/Lp/Cs/Cp with D/Q/θ /ESR parameters. 100 Hz/120 Hz 1000 Hz
* Support DCR mode 1.00 Ω to 200.0 MΩ . 20 Ω ± ( 1.2% + 5d ) ± ( 1.2% + 5d ) After Short CAL.
* Five different test frequency are available : 200 Ω ± ( 0.8% + 5d ) ± ( 0.8% + 5d )
100 Hz/120 Hz/1 KHz/10 KHz/100 KHz. 2000 Ω ± ( 0.8% + 5d ) ± ( 0.8% + 5d )
* Test AC signal level : 0.6 V rms typically. 20 KΩ ± ( 0.8% + 5d ) ± ( 0.8% + 5d )
* Test range : ( ex. F = 1 KHz ) 200 KΩ ± ( 0.8% + 5d ) ± ( 0.8% + 5d )
L : 200.00 uH to 2000.0 H 2000 KΩ ± ( 1.5% + 5d ) ± ( 1.5% + 5d ) After Open CAL.
C : 2000.0 pF to 2.000 mF 20 MΩ ± ( 1.5% + 5d ) ± ( 2.5% + 5d ) After Open CAL.
R : 20.000Ω to 200.0 MΩ 200 MΩ ± ( 2.5% + 5d ) ± ( 6% + 5d ) After Open CAL.
* Multi-level battery detector.
* RS232/USB PC Computer interface. Range Accuracy Accuracy Remark
* Can default auto power off. 10 KHz 100 KHz
20 Ω ± ( 1.2% + 5d ) ± ( 2.5% + 5d ) After Short CAL.
GENERAL SPECIFICATIONS 200 Ω ± ( 0.8% + 5d ) ± ( 0.8% + 5d )
Display LCD size：56.4 X 52.9 mm. 2000 Ω ± ( 0.8% + 5d ) ± ( 0.8% + 5d )
Test frequency 100 Hz/120 Hz/1 KHz/10 KHz/100 KHz 20 KΩ ± ( 0.8% + 5d ) ± ( 0.8% + 5d )
Function L/C/R Function selector 200 KΩ ± ( 0.8% + 5d ) ± ( 0.8% + 5d )
Frequency selector 2000 KΩ ± ( 1.5% + 5d ) ± ( 3% + 5d ) After Open CAL.
D/Q/θ /ESR selector 20 MΩ ± ( 2.5% + 5d ) ——————- After Open CAL
| Description： |
| * Function is same as the LCR-9184, but without LCD backlight structure, without sorting function and the spec. accuracy is larger than LCR-9184. |
LCR METER HOLSTER Model No：HS-03
Holster for DM-9960, DM-9961, LCR-9183 and LCR-9184.
| Description： |
| Holster for DM-9960, DM-9961, LCR-9183 and LCR-9184 |
POCKET LCR METER
Model No：LCR-9063
| Description： |
| POCKET LCR METER Model : LCR-9063 * Pocket size, 13 mm LCD, Max. 1999. * L- 5 ranges, 2 mH to 20 H. C-6 ranges, 2 nF to 200 F. R- 6 ranges, 200 ohm to 20 M ohm. * Economical type. * Size : 120 x 72 x 37 mm. |
LCR METER
Model No：LCR-9083
| Description： |
| LCR METER Model : LCR-9083 * Inductance, Capacitance, Resistance, Diode. * L : 5 ranges, 2mH to 20H. C : 6 ranges, 2 nF to 200 F. R : 6 ranges, 200 ohm to 20 M ohm. * Size : 185 x 87 x 39 mm, 18 mm LCD. |
SMD TEST CLIPS
Model No：TLSM-15
| Description： |
| SMD TEST CLIPS Model : TLSM-15 * The test clips used for measuring the SMD components (resistor, capacitor, inductor, diode..) * Cable length : appro x 90 cm |
SMD TESTER Model : SMDA-22
LCR METER Model : LCR-9173
100 Hz╱120 Hz╱1 KHz╱10KHZ
SMD TESTER, optional
Model：SMDA-22
SMD TEST CLIP, optional
Model：SMDC-21
Carrying case
( optional )
FEATURES
* 6000 counts ADC resolution. Capacitance ( Cp/Cs ) : D ≦ 0.1, 0.5V(rms)
* Dual power supply , Battery or AC/DC Adapter.
* High performance analog front end for impedance Range Accuracy Accuracy (Z) measurement. 100 Hz 120 Hz
* Support Z / DCR measurement for LCR mode. 600 pF ± ( 3.5% + 5d ) ± ( 3.5% + 5d )
* Four different test frequency are available : 6000 pF ± ( 2.5% + 5d ) ± ( 2.5% + 5d )
100 Hz/120 Hz/1 KHz/10 KHz for L/C/R measurement. 60 nF ± ( 2.0% + 5d ) ± ( 2.0% + 5d )
* Built-in simple DMM front end circuit to support 600 nF ± ( 2.0% + 5d ) ± ( 2.0% + 5d )
DCV / Freq. / Diode mode. 6000 nF ± ( 1.5% + 5d ) ± ( 1.5% + 5d )
* Test AC signal level : 0.5 V rms typically. 60 uF ± ( 1.5% + 5d ) ± ( 1.5% + 5d )
* Test range : ( ex. F = 1 KHz ) 600 uF ± ( 1.5% + 5d ) ± ( 1.5% + 5d )
L : 600.0 uH to 60.00 H 6000 uF ± ( 2.5% + 5d ) ± ( 2.5% + 5d )
C : 600.0 pF to 600.0 uF 10 mF ± ( 3.5% + 5d ) ± ( 3.5% + 5d )
R : 60.00Ω to 20.00 MΩ
* Low battery voltage detector. Range Accuracy Accuracy
* Min. source resistance : 120Ω typical. 1k Hz 10 kHz
* 6 ratio resistor range used for LCR mode. 600 pF ± ( 2.5% + 5d ) ± ( 2.0% + 5d )
* Support buzzer sound driver with driving pattern 6000 pF ± ( 2.0% + 5d ) ± ( 1.5% + 5d )
& frequency selectable. 60 nF ± ( 2.0% + 5d ) ± ( 1.5% + 5d ) 600 nF ± ( 1.5% + 5d ) ± ( 1.5% + 5d )
GENERAL SPECIFICATIONS 6000 nF ± ( 1.5% + 5d ) ± ( 1.5% + 5d )
Display LCD size：46.5 X 45.5 mm. 60 uF ± ( 1.5% + 5d ) ± ( 2.5% + 5d )
Test frequency 100 Hz/120 Hz/1 KHz/10 KHz 600 uF ± ( 2.5% + 5d )
MODE L/C/R L/C/R Function selector 6000 uF Frequency selector 10 mF